![]() |
#1
|
|||
|
|||
![]() Hi I have managed to complete all the welding on my chassis apart from engine gearbox and rad mounts, what's the best next thing cut out portion of BR10 ?
My chassis is quite rusted up in places so it's going to need a good clean up should I concentrate on this before considering fitting the floor and cutting out BR10? For various reasons I have had to take my time building my chassis it is a good feeling to of reached this point I would not of got this far with out the help from the forum thankyou DaveyB |
#2
|
|||
|
|||
![]() Well done Dave ! It's a great feeling, for ages you doubt yourself, then one day, it all comes together. If your chassis is getting rusty, I would recommend that you get it finished ASAP, then book it in for soda blasting. Soda blasting is extremely effective, and doesn't generate as much heat as sand blasting. I live in Gloucester, and I have booked my chassis in for a soda blast & zinc phosphate anti rust protection, all for £180 ! If you live by me, I will give you their number. I have done a few car restorations, & I can't recommend this process strongly enough. Just make sure that all your weld are fully finished first. I am putting my wishbones in as well.
|
#3
|
|||
|
|||
![]() Thanks for the reply and thanks for the idea but I think I will just be rubbing down priming and painting the chassis just to save costs really but thanks again.
Dave |
#4
|
|||
|
|||
![]() Angry grinder with a cup brush will bring the metal up good,
but they get everywhere those wires, cant go in the garage without getting one in my shoe!! ![]() Well done on your progress so far ![]() |
#5
|
|||
|
|||
![]() I will give that a try thanks.
Dave |
#6
|
||||
|
||||
![]() Hi Dave,
My friend Tony at work bought one of those sand blasters off eBay for around £100, well worth it if you have a good enough compressor. We used it for loads of parts for the build in the end.
__________________
Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction. Albert Einstein http://s1199.photobucket.com/albums/aa472/JohnoSS1/ Johno |
#7
|
|||
|
|||
![]() Thanks I will have a look at that as there are areas that will be tricky to get to with a wire wheel or emery cloth.
Daveyb |
![]() |
Thread Tools | |
Display Modes | |
|
|