Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th November 2013, 11:07 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default had a date with the rollers

took my car to tipton garage yesterday for a session on the rollers.
http://www.tiptongarage.co.uk/
Steve Miles preps and tunes cars for the st marys trophy at goodwood revival and luckly is only 13 miles from where i live and squeezed me in on a rain free day.
me and steve there made a bit of a joint effort and had it tuned in only a bit over an hour (starting from my own map) as steve was nice enough to let me tune on my laptop while he run the rollers controls and made a few pointers.
started with 159bhp with my homebrew map set by feel and sound on the road and steve pointed out "theres not much wrong with that is there". gains where made 3-4000 and 6500-7200 with a bit more advance and a tiny bit leaner, finished with 165.1bhp@7155rpm and 129.1lb/ft@5985rpm.
not bad from a 1800 mk1 zetec engine that started with 105bhp 20 years ago in a fiesta xr2i.
after we got the full throttle runs quickly sorted we tweeked every part throttle load site for advance and afr to get better mpg's
im very happy with the curves nice and linier
[IMG][/IMG]

Last edited by baz-r : 15th November 2013 at 05:04 PM. Reason: typo
Reply With Quote
  #2  
Old 10th November 2013, 10:00 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

SMiles all round



Good result
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #3  
Old 10th November 2013, 10:46 AM
Enoch Enoch is offline
Senior Member
 
Join Date: Nov 2009
Location: Near Boston, Lincolnshire
Posts: 788
Default

Those results are impressive but not nearly as impressive as the fact that you got so close to them without the aid of the rolling road! Maximum respect!
Reply With Quote
  #4  
Old 11th November 2013, 03:12 AM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

its not a hard as you think to get your full throttle pull set. most of the work was needed sorting part throttles out in areas where i just cant hold the engine back on any load site for any amount of time on the road as the car is so much lighter than a normal car, you keep gaining revs way too quickly to work out whats going on.

i would actualy like the peak power and torque to be in a bit earlyier in the rev range as i had planed it and im not quiet sure why it keeps on gaining all the way pritty much to my rev limiter setting? i worked it out to drop off about 6800 good job i put in under piston oil jets and stronger big end bolts when i had it all apart after all.

most importent thing is the car feels way more refined to drive as the power comes in nice between lighter and max throttle before it was more mr jackle or mr hide.


few pic's
[IMG][/IMG]

[IMG][/IMG]
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.