#1
|
||||
|
||||
Mirrors
Just looking at buying mirrors and noticed very few are e marked. then looked in the IVA manual.
"7. All mirrors must have an acceptable approval marking or have equivalent characteristics to a mirror approved for use on a vehicle of the same category as follows: The reflective surface must be encased in a protective housing. surfaces contactable by a 165mm sphere (interior) or a 100mm sphere (exterior) must have a radius of curvature of at least 2.5mm – except for fixing holes or recesses less than 12mm wide, which must be blunted" So mirrors don't need e marking they just need to comply? |
#2
|
||||
|
||||
Yep, no e-mark required.
|
#3
|
||||
|
||||
Tks. That's my lights and mirrors all sorted and ordered then.
|
#4
|
|||
|
|||
check the glass size is big enough.
|
#5
|
||||
|
||||
If you have the racetech or similar they are physically big enough (for an interior mirror see this post) but I don't 100% know if they meet the fields of view at iva.
That's what I've got on mine. Last edited by SeriesLandy : 22nd June 2014 at 07:04 PM. Reason: Edited as incorrect facts |
#6
|
||||
|
||||
When I had my IVA test all the examiner seemed interested in was looking for E markings. Spent ages looking for them on the tyres!!!
When he queried my reflectors as they didn't have E marks, I pointed out that they don't need to have them. The response I got was 'how do I know they have similar characteristics'!!! So I swapped them for some spares I had which were E marked. Mirror size was checked so make sure that they are the right size, and convex to aid viewing angles.
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt |
#7
|
||||
|
||||
As I previously stated, the racetech mirrors are not iva ok. They are fine for interior (with trim) but don't comply with the second part of point 9 in the manual.
"An exterior mirror must be a minium of 40mm hing and 70mm long and be able to incorporate a measurement parallel to the height of the rectangle at least 70mm in length within the lens." Somehow I missed this and it was my only fail on the day. The examiner did let me go and buy a pair so it turned out £60 cheaper than a retest but still expensive for a set of mirrors. |
Thread Tools | |
Display Modes | |
|
|