|
|
#2
17th January 2015, 01:16 PM
|
||||
|
||||
On my CAD 3D chassis, I found 2,931m.
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/ 
|
|
#3
17th January 2015, 05:09 PM
|
||||
|
||||
|
That does not sound right. On my roadster it's around 2380 mm, down from 2608 mm on Sierra.
The design wheelbase is not so trivial to work without a CAD model out due to the caster angle and upright trail offset on the front axle.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. Last edited by alga : 17th January 2015 at 05:11 PM.
|
|
#4
17th January 2015, 05:21 PM
|
||||
|
||||
|
I had to go to the garage to check. And you are totally right Alga.
So why the measurements on my CAD drawing are wrong? They are not, but I am, I made a typo: I swapped the 3 and the 9: it is 2.391m and not 2.931m  Sorry about that 
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
