#101
|
||||
|
||||
A stop pin as far as I Recall..
Give me a moment. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#102
|
||||
|
||||
No Stop pin, it must be internal.
The needle probably needs re-aligining with zero
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#103
|
|||
|
|||
Thanks TT
Any ideas how? |
#104
|
||||
|
||||
Pull it off, turn it to 0 and push it back on.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#105
|
|||
|
|||
Simples
Next question--I am buying up a few clocks/guages for my post IVA dash.Would any electric impulse type rev counter/tacho work accurately with my sierra cvh. Also is my oil pressure switch fairly easily adapted to a tube for oil pressure guage. Thanks in advance. Last edited by ayjay : 13th October 2012 at 08:40 PM. |
#106
|
|||
|
|||
Any wisdom on previous post please?
|
#107
|
||||
|
||||
most reve counters will take a coil input with a swithch on them for the cylinder config
I would use a non capilary electrical oil guage TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#108
|
|||
|
|||
Does the oil guage need a different sensor to replace the switch
|
#109
|
||||
|
||||
Of course; they usually provide a pressure switch output, too.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#110
|
||||
|
||||
Normaly a Tee piece is put into the block, the pressure switch and a pressure sender then fit into that.
The disadvantage usualy of electrical guages is that they only do a 180 sweep and not 280ish like the capillary ones. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|