|
|
#151
26th May 2013, 09:25 PM
|
||||
|
||||
Busy again.. Welded in my gearbox mount using the original MX5 engine mount.
 A bit over done maybe but it was some pieces of 3mm plate I had and it works. Also re-thunk my diff nose bracket. I welded a 5mm tab onto the chassis and changed the axis so the forces are feeding through more braced areas.   Ignore the dodgy bolts I need to order a bundle of M12 x 25s.
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 
|
|
#152
26th May 2013, 09:29 PM
|
||||
|
||||
|
I also started on the panels. Im using cardboard to make templates then cut out of some sheet.
   And then I stopped because I should spend some time with my wife....  Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
|
#153
26th May 2013, 09:44 PM
|
|||
|
|||
|
I like the way that the crossmember and uprights have tied up with the gearbox mounts.
 Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669
|
|
#154
2nd June 2013, 06:51 PM
|
||||
|
||||
|
Got the wife to paint my chassis for me today.
  Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
|
#155
3rd June 2013, 12:03 AM
|
||||
|
||||
|
Must be love stot lol
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/
|
|
#156
3rd June 2013, 08:35 PM
|
||||
|
||||
|
who wants to tell him .... all together now "she's missed a bit!"
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334
|
|
#157
3rd June 2013, 08:50 PM
|
|||
|
|||
|
How the heel did you manage that
Arfon
|
|
#158
3rd June 2013, 09:24 PM
|
||||
|
||||
|
Quote:
Its done in Epoxy Mastic chassis paint and we stippled it rather than leave brush strokes. Looks like a rollered finish. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
|
#159
12th June 2013, 07:24 PM
|
||||
|
||||
|
Im on a go slow at the moment until my chassis fully cures but I got this delivered today.
 Firm down the road wanted £100+vat to shorten and £50+vat per UJ to replace.  Dunning and Fairbank quoted £85 + £12 carriage + VAT to shorten, new UJs and balance. Turned out it didnt need new UJs so £45 + carriage + VAT. Bargain! Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
|
#160
15th June 2013, 04:25 PM
|
||||
|
||||
|
Got my floor fitted!
   I didnt use clecos, I drilled holes at every tube intersection to start and then riveted it down at 4 corners before drilling all the other holes. Drilled the 4 rivets out to clean up/deburr then sikaflexed the chassis plonked the sheet on top and riveted all round. 4 and a half hours to drill and deburr 264 holes then PU and rivet 264 rivets. Phew. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
