![]() |
#151
|
|||
|
|||
![]() hi steve cant find the pics I took but this is the relevant text that I did for Richard;
Right measuring back from the front edge of FF4 , the front return edge is 109cm back, and the rear bottom corner of the scuttle is in line with the front edge of U5 gary
__________________
remember we are not mad just creatively insane |
#152
|
|||
|
|||
![]() looking at your pic with the alternator its the plug and wiring that get close to the shaft, also had to relieve my plenum support a tadge for piece of mind
__________________
remember we are not mad just creatively insane |
#153
|
|||
|
|||
![]() Cheers thanks for that
Its actually lower than it looks in the pic and the support isnt in place but should be ok Thanks
__________________
Slowly tipping over the edge into madness |
#154
|
|||
|
|||
![]() Got a bit more fabricating done
Handbrake cable mounting ![]() ![]() Brake pipe mountings ![]() ![]()
__________________
Slowly tipping over the edge into madness |
#155
|
|||
|
|||
![]() I started doing some metal turning classes before christmas and have been making some stuff for the car
Earth points ![]() Headlamp supports ![]() ![]() Steering column tube ![]()
__________________
Slowly tipping over the edge into madness |
#156
|
|||
|
|||
![]() That's great work Steve, and helpful to my build as I'm about to start in handbrake location thanks
|
#157
|
|||
|
|||
![]() Quote:
I did move it over and forward from the position in the saturn plans so i can use the cables without having to change the length of them Also i think it was just in an awkward position in those plans aswell
__________________
Slowly tipping over the edge into madness |
#158
|
|||
|
|||
![]() Your build looks great. The pictures of the wishbones are a great help. I am scratching my head about those at the moment and the Saturn plans I have are confusing me quite a bit. I hope that it will all become clear once I start making the jig and piecing parts together.
__________________
Matt King Total spent: £0 Achieving an ambition |
#159
|
|||
|
|||
![]() Anybody know what the outside diameter of the protech front springs are
Thanks
__________________
Slowly tipping over the edge into madness |
#160
|
||||
|
||||
![]() They're 1.9" ID nominal. The front 350 lb/in ones are 68mm OD, the 250 lb/in ones are 65mm OD.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
![]() |
Thread Tools | |
Display Modes | |
|
|