Few IVA Questions

[CTWV50]

Originally Posted by ayjay

I had trouble getting any advice from Chadderton.
However at test they were very helpful and reasonable.
Asked if I had locked threads on calipers and seat belt bolts . I also made sure the blue stuff was visible on end of thread

Thanks ayjay, I'd not done this. I will get this done soon.

[Davidbolam]

Originally Posted by CTWV50

Thanks ayjay, I'd not done this. I will get this done soon.

My tester asked what locking device had been used on the vertical bolt that goes through the bottom mx5 ball joint. I used the nut lock glue stuff but had I thought about it a bit more would have made sure there was plenty blue on display.

David

[CTWV50]

Originally Posted by Davidbolam

My tester asked what locking device had been used on the vertical bolt that goes through the bottom mx5 ball joint. I used the nut lock glue stuff but had I thought about it a bit more would have made sure there was plenty blue on display.

David

oh I've used a nylock nut there.

[SeriesLandy]

Anything that I loctite'd I took a photo of to show that it had been.

[CTWV50]

Good test day write up here.

http://www.detailingworld.co.uk/foru...ield&page=2 7

[CTWV50]

Another good read.

http://www.tamarisktechnicals.com/pages/iva.html

[CTWV50]

Another that mentions side light tell tale fail.

http://www.locostbuilders.co.uk/foru...php?tid=146174