Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 20th February 2010, 10:10 PM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

Quote:
Originally Posted by AdrianH View Post
OK I did miss understand the drum brakes bit, I remember our old Triumph Herald That was drums all around.


For a bit of fun Energy is Kinetic energy KE = (M*V*V)/2 (can't figure how to get squared!).

So a Sierra at 1000 Kg doing 50 mph, must change to metres per sec. errr. 22.35 mps

KE is 249761.25 Joules

A 500 Kg car at 100 mph is 499522.5 Joules

So our little car at 100 compared to a Sierra at 50 has twice the energy because of the square, but half the energy of the Sierra at 100 mph.

Adrian
Errr yeah, I think . I threw the question out to see what would come back but I have a sneaky suspicion that your sums are better than mine. I shall be erring on the side of caution and using discs all round, probably with a servo .

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #12  
Old 20th February 2010, 10:42 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

trust me you really really really really really really DONT need a servo.

i was dubious until yesterday when i drove the car properly for the first time with sorted brakes.

due to the increased pedal ratio the breaks were very very effective with very little foot pressure. it took absolutely nothing to lock the car up

the ideal setup for the roadster to get through iva without any problems is

sierra 22.2mm master cylinder
240x24mm vented front sierra discs
standard sierra 53.9mm front callipers
203x46mm sierra drums with 20.6mm slave cylinders.

as far as i know this is the only break set-up for a roadster that has passed iva first time without any tweaking of the rear pressure.
Reply With Quote
  #13  
Old 20th February 2010, 10:52 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Duly noted & written in my book Ash
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #14  
Old 20th February 2010, 10:56 PM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

Thanks for the input Ash but mine isn't exactly as per the book, for one thing it will be significantly heavier, despite my aims for a 650KG kerb weight its looking like I'll be lucky if its under 750KGs. I'll hold fire on the servo till I've tested it all (I have a private road available adjacent to the build location ).

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #15  
Old 21st February 2010, 12:00 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Drums it is then, 1 Snare and a Kettle
Reply With Quote
  #16  
Old 21st February 2010, 01:00 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Quote:
Originally Posted by AshG View Post

as far as i know this is the only break set-up for a roadster that has passed iva first time without any tweaking of the rear pressure.
I had the standard sierra setup, rear drums, and mine passed fine. Stops on a sixpence and no brake fade at all on a tight and twisty track, and that's rally booting it.....

There is no need to be concerned about upgrading brake setup the Sierra disc and drum works perfectly adequate on the 500kg roadster. You can always uprate them after IVA if you feel them to be insufficient.

Just Have Fun....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #17  
Old 21st February 2010, 02:59 PM
james3004's Avatar
james3004 james3004 is offline
Senior Member
 
Join Date: Oct 2007
Location: Haddenham, Cambridge
Posts: 480
Default

Thanks for the advice Ash

Looks like drums is the easier/better option for the roadster
__________________
--- James ---

IVA passed 20 June 2017
Flickr Album
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:38 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.