Cheap Fuel Tank

[HandyAndy]

Originally Posted by AshG

car is looking nice and dusty

tell me about it Ash

the dust is thanks to the work on the single seater
it,ll soon clean up with an air line on it.
did you get my pm Ash?

andy

[AshG]

yeah sorry i read it then forgot to reply lol

[HandyAndy]

Originally Posted by AshG

yeah sorry i read it then forgot to reply lol

doh

no worries

andy

[mark]

Originally Posted by AshG

car is looking nice and dusty

You should see the rest of the workshop

It looks like daniella westbrooks coffee table

[HandyAndy]

Originally Posted by mark

You should see the rest of the workshop

It looks like daniella westbrooks coffee table

but its not in nice straight lines

andy

[Tatey]

It may just be me misreading it but the auction says:

This unit is made to be mounted in upright position with filler neck at top so that the fuel sender reads correct as in picture

Does that mean it needs to be standing upright compared to lying down as in Andy's picture? If it does what issues would this cause with the sender? How hard would it be to put a new one in which would work which the tank lying down?

[Land Locked]

Originally Posted by Tatey

It may just be me misreading it but the auction says:

This unit is made to be mounted in upright position with filler neck at top so that the fuel sender reads correct as in picture

Does that mean it needs to be standing upright compared to lying down as in Andy's picture? If it does what issues would this cause with the sender? How hard would it be to put a new one in which would work which the tank lying down?

The after market fuel gauge/senders I've used just manipulate the float arm to get it to suit the tank being used.

So it should just be a case of lengthening, shortening and/or bending the float arm.

That said, i try to set it up in such a way that it shows empty a goodly bit before it is empty.

[HandyAndy]

Originally Posted by Tatey

It may just be me misreading it but the auction says:

This unit is made to be mounted in upright position with filler neck at top so that the fuel sender reads correct as in picture

Does that mean it needs to be standing upright compared to lying down as in Andy's picture? If it does what issues would this cause with the sender? How hard would it be to put a new one in which would work which the tank lying down?

i had the same thoughts when i saw the pic on ebay, so i phoned the seller & confirmed that the tank is meant to sit as in my photos, so it has worked out ok, tho as i said i haven,t wired it up yet but it is in the correct orientation in MY photo,s .
cheers
andy

[mark]

It would be very easy to retro fit a new fuel guage sender anyway if needs be

The one from car builder solutions look pretty good

[Tatey]

Ah that's defiantly good to know. I'll be buying one myself when the time comes.