![]() |
#201
|
|||
|
|||
![]() Just read through your whole build. Really nice fabrication work and welding! Keep it up - I'm following with interest.
|
#202
|
|||
|
|||
![]() Thanks a lot. Its slow going.
__________________
Slowly tipping over the edge into madness |
#203
|
|||
|
|||
![]() So ive been slowly tipping away doing a few bits and pieces
Mostly stripping and cleaning the hubs with wire brushes in the drill which is a pain Another kit car builder dropped in last weekend and suggested electrolysis rust removal This is something i was hoarding stuff for but was too lazy to actually do so not long after that fella left i got cracking ![]() ![]() ![]() I gave a part 6 hours and it was quiet clean which made me happy
__________________
Slowly tipping over the edge into madness |
#204
|
|||
|
|||
![]() So then i got impatient
![]() ![]() And started on another bigger one I also did a bit of filler work on the bonnet ![]()
__________________
Slowly tipping over the edge into madness |
#205
|
|||
|
|||
![]() So i Gave the knuckle 24 hours in the bath
And i have to say i am delighted with the results compared to the effort and time it took with the drill and wire brush When i took it out of the bath it still had some flakey bits so i gave it a blast with the power hose to remove what was left Then i dried it and ran over it with the wire brush and gave it a coat of kurust Also the process removes all the grease and grime and crap ![]() ![]() ![]() ![]()
__________________
Slowly tipping over the edge into madness |
#206
|
|||
|
|||
![]() This is what it looked like before
![]() 2 on the go now ![]()
__________________
Slowly tipping over the edge into madness |
#207
|
|||
|
|||
![]() Brilliant - welcome to the club - worked for me as well on loads of rusty bits for my build
![]()
__________________
My build blog here http://ianhaynes20.wordpress.com |
#208
|
|||
|
|||
![]() Wow - I've been toiling away with a parts washer, pressure cleaner and wire brushes! That looks a lot easier.
|
#209
|
|||
|
|||
![]() So ive a serious pain in my face at the moment cleaning and painting and reassembling the engine
Before ![]() Current ![]() Im also doing a coil on plug upgrade as i had all the parts i needed so it didnt cost me anything ![]() ![]()
__________________
Slowly tipping over the edge into madness Last edited by SteveH1 : 30th July 2018 at 10:08 PM. |
#210
|
|||
|
|||
![]() Some more progress
![]() Im also going to do some kind of diy coolant reroute Havnt got it fully figured out yet ![]() This part fits nicely of the back of the engine like so ![]()
__________________
Slowly tipping over the edge into madness |
![]() |
Thread Tools | |
Display Modes | |
|
|