Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 6th April 2011, 11:25 PM
rapidtornado's Avatar
rapidtornado rapidtornado is offline
Senior Member
 
Join Date: Jan 2009
Location: Herefordshire
Posts: 330
Default

Just done a bit of research on spring rates for R6 shock... they seem like over kill for Haynes:

03/04 R6 shock is 9.85 kg/mm which converts to ~551lbs
05 R6 shock is 10.98 kg/mm which converts to ~614lbs

But you guys say there are people out there with this set up? What's the ride like? .... don't say 'stiff'

Rapid
Reply With Quote
  #22  
Old 6th April 2011, 11:36 PM
ayjay ayjay is offline
Senior Member
 
Join Date: Dec 2010
Location: Coedpoeth near Wrexham, North Wales
Posts: 737
Default

Is there any info re spec for shocks for some of the lighter bikes ?. Would the spring rates on these be more suitable?

Cheers

Adrian
Reply With Quote
  #23  
Old 7th April 2011, 01:29 PM
monsterob monsterob is offline
Senior Member
 
Join Date: Jul 2010
Location: crewe
Posts: 400
Default

Right well maybe the r1 shock is better suited to haynes then i got a figure from yamaha that gave 7.84 n/ mm maybe ill have to do a vid of the travel i think the front with a new mounting point will be fine with my heavy ish 2.0 ecotec and its box.

Only thing with using them then is the length about 12" eye to eye
__________________
theres a box ! im not allowed in it ! i have to think outside !
Reply With Quote
  #24  
Old 7th April 2011, 02:32 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

SV650 shocks are cheap, soft, and plentiful.

Probably a bit on the long side though - I just happen to have one sitting under my desk at work and it's 13.5 inches between mounting points.
Reply With Quote
  #25  
Old 7th April 2011, 06:26 PM
rapidtornado's Avatar
rapidtornado rapidtornado is offline
Senior Member
 
Join Date: Jan 2009
Location: Herefordshire
Posts: 330
Default

how would 13.5 be too long if people are buying 13" with 1" extensions?
Reply With Quote
  #26  
Old 7th April 2011, 06:33 PM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

I think it would be ok you might need to move the mounting bracket on the lower wishbone though.
Reply With Quote
  #27  
Old 7th April 2011, 10:12 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Quote:
Originally Posted by rapidtornado View Post
how would 13.5 be too long if people are buying 13" with 1" extensions?
My bad. For some reason I had it in my mind that the shock length was supposed to be about 9 or 10 inches
Must have been thinking of the compressed length...
Reply With Quote
  #28  
Old 8th April 2011, 09:01 AM
monsterob monsterob is offline
Senior Member
 
Join Date: Jul 2010
Location: crewe
Posts: 400
Default

The book is only a reccomendation its not gospel. But it does say " other shocks can be used but you may have to move the mounting positions"
__________________
theres a box ! im not allowed in it ! i have to think outside !
Reply With Quote
  #29  
Old 8th April 2011, 11:01 AM
loony's Avatar
loony loony is offline
Senior Member
 
Join Date: Jul 2010
Location: Kielce, Poland
Posts: 185
Default

This is Locost mentioned before - with R6 shocks
http://www.youtube.com/watch?v=odehGEqqo1k

But - it has different front suspension (shock angle) so... for Haynes Roadster maybe R6 aren't best choice.

I found spring rates for SV650 on other site:
1999 - 2002 SV650 and SV650S have 510 lbs/inch - 9.129 kg/mm shock spring.
2003 - 2008 SV650 and SV650S have 430 lbs/inch - 7.697 kg/mm shock spring.
__________________
Lucas

ZX9R BEC Haynes Roadster - build cost so far: £1125
My build thread

"Whatever you can do or dream you can, begin it. Boldness has genius, power, and magic in it." J.W.Goethe

Last edited by loony : 8th April 2011 at 11:05 AM.
Reply With Quote
  #30  
Old 8th April 2011, 02:12 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Quote:
Originally Posted by loony View Post

I found spring rates for SV650 on other site:
1999 - 2002 SV650 and SV650S have 510 lbs/inch - 9.129 kg/mm shock spring.
2003 - 2008 SV650 and SV650S have 430 lbs/inch - 7.697 kg/mm shock spring.
I had a pair of 1999 SV650s a few years back (one for road and one for track )
I changed the shock on the track one as it was faaar too soft. Can't believe they made it even softer on later bikes!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:19 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.