Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 23rd July 2010, 05:04 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

The car will start fine even at -10c with the wire disconnected. The purpose of it wire is to heat the bi-metalic spring in the choke control housing. It starts to bring the choke off before the temperature of the water circulating in the auto choke housing warms the spring. So without it you will have a longer period with the choke fully on and the fast idle.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #22  
Old 3rd August 2010, 06:47 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

as tt says
im pritty sure its powerd from a relay switched by an ouput on the hybrid ign module with cvh carbed engines
Reply With Quote
  #23  
Old 12th August 2010, 02:30 PM
antonia800 antonia800 is offline
Junior Member
 
Join Date: May 2010
Posts: 28
Default

the alternator works by being excited from the small terminal (warning light) this should be connected from a switched supply (usually ignition) so one end is live from the switch into the warning light and then to the alternator.The other large teminals on the alternator go directly to the battery, the alternator is earthed through the engine itself to the earth strap to the battery. Check your earth conection and correct the wiring it will work, if all is ok with the altenator.Hope this helps!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:00 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.