#21
|
||||
|
||||
Quote:
I,ll check the wiring from each sender tomorrow, if they are wired correctly then maybe its what "Mark" has suggested. One of my winter mods will be a full new dash with these gauges & a bright 6 warning light setup & rev counter & speedo cheers andy |
#22
|
||||
|
||||
all working now
Thanks for your help guys,
I had connected everything correctly The problem was that the sandwich plate wasn,t earthing to the block/chassis, so I,ve ran an earth from the sandwich plate direct to the chassis & it all now works Oil temp is showing a reading, tho can,t get it up to full temp as not allowed to drive it yet, Oil pressure is showing between 25 to 30 at tickover & between 60 to 80 at high revs. Yet again, this great forum came to the rescue , thanks everyone cheers andy |
#23
|
||||
|
||||
Glad you've got it sorted Andy, thought that's what it would be
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
Thread Tools | |
Display Modes | |
|
|