#371
|
|||
|
|||
|
#372
|
|||
|
|||
|
#373
|
|||
|
|||
|
#374
|
|||
|
|||
Tidiest build by far!
|
#375
|
|||
|
|||
I phoned Westfield parts and collected them from a show. They showed me on their model how to attach them etc. they are also pre bent.
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#376
|
|||
|
|||
|
#377
|
|||
|
|||
|
#378
|
|||
|
|||
Next job Dashboard, I've been struggling with this, deciding which way to go, I didn't like the look of the equinox one, I wanted a carbon one but there's not one with an iva edge,
In the end I decided to make one with deboned sheet, easy to work with etc, as for the lower edge I'm using black pvc waste pipe, sounds crude but it's turned out sweet Template first, I used 2mm coriguated plastic from wickes, was only £4 for an 8x4 sheet and can be easily cut Fixing holes drilled and rivnuts fitted in scuttle Rubber grommet and sleeve for steering column |
#379
|
|||
|
|||
I was in the zone and forgot to take any pictures, I cut all the switch and dash holes out on my dads cnc
Back of the dash All fitted up for good hopefully, lower edge pipe trim fitted Full photo Battery fitted and passenger footrest, I might block the battery off from the footwell with a bit of dibond |
#380
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|