#431
|
|||
|
|||
Alterations
Hi skov been looking at your build thread, can you give me a bit of advice in the book it shows TT8 as 127mm and Saturn Mx5 alterations show TT8 as 165mm but in there photo it shows top and bottom tranny rails widening from behind TT8 to the new gap of 240mm is this right?.
Also in your picture on page 4 SB5,SB6 you haven't moved them out to line up with the tranny rails, I bought a chassis which has been part built for a Sierra which I will have to alter so I was hoping to cut the tranny top and bottom rails behind TT8 and renew to the new dimensions and leave SB5,SB6 where they are like you have would that be okay or does the tranny widen out further forward as we'll any information would be much appreciated. |
#432
|
||||
|
||||
Hi mate, that's right - the tranny tunnel is the same up to and including tt8. It's only behind tt8 that it widens out.
I can't remember the numbers for the seat back rails, but the two vertical ones either side of the diff will need to be moved out to match the tunnel. The two diagonal ones above them can stay where they are though. Last edited by skov : 18th October 2012 at 12:16 AM. |
#433
|
||||
|
||||
Thought I'd whip the sewing machine out and have a practice go at the boot cover (the real one won't be red!).
Didn't turn out too bad for my first proper attempt at upholstery, some of the seams are a bit wonky, but I think I'm starting to get the hang of it: |
#434
|
|||
|
|||
Skov that cover is the nuts.
bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#435
|
|||
|
|||
Hi skov are you using a polo radiator. If so is it from a mk2?
What type of expansion bottle have you used? All the ones I have looked at seem to have too many outlets. thanks David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#436
|
||||
|
||||
Hi David,
Radiator is VW Polo 1983 - 1990 Expansion Tank is VW Polo 1981 - 1994 |
#437
|
|||
|
|||
Thanks.
Does your expansion bottle have more than one outlet? The ones I have searched appear to have 2. I have looked at your photos and I can only see 1. If there is more than one outlet how did you plumb the second outlet in? David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#438
|
||||
|
||||
All VAG bottles I've seen have a ~16 mm outlet at the bottom and a 8 mm inlet at the top.
Mine's from a Škoda, but exactly the same one has been used in Golfs, Passats for about a decade.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#439
|
||||
|
||||
Mines the same bottle.
I've got the 16mm at the bottom Tee-d into the heater matrix hose, and I think I'm going to link the smaller outlet at the top to the small outlet at the top of the radiator. |
#440
|
||||
|
||||
I decided to get that top outlet hooked up this evening whilst I was thinking about it.
I used my left over copper fuel line with a couple of short bits of hose either end to go to the tank and rad: |
Thread Tools | |
Display Modes | |
|
|