#41
|
||||
|
||||
there are many sorts of five pin relay for varying purposes.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#42
|
||||
|
||||
Can someone point me towards the correct type then? I thought they all worked on the same basic principle.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#43
|
||||
|
||||
What relay have you got?
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#44
|
||||
|
||||
My relay is one of these
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=230493939634 I'm now also struggling with the flasher relay. It's not flashing, just giving constant 12v
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#45
|
||||
|
||||
Is there a way to test the relays (especially the flasher), as i've been offered a replacement, if its faulty.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#46
|
||||
|
||||
Have you got the lights attatched to the flasher?
The five pin looks like a normal changeover relay. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#47
|
||||
|
||||
I've not got all the lights attatched to a flasher, just the front ones. It's getting a 12v but not flashing???
Also, that's what i thought about the 5 pin, but that's causing problems too
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#48
|
||||
|
||||
I seem to recall a problem on my sierra, try connecting another lamp. and see fi the relay begins to flash. In nor mal operation you have the load of 4 lamps (front,rear,side, tell tale)
What have you got connected to what on the 5pin. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#49
|
||||
|
||||
The 5 pin one is connected as per the v1.3 diagram in this thread.
I'll try connecting more lights this afternoon
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#50
|
||||
|
||||
David
I've got my changeover relay wired up as per the diagram and seems to be working fine using the telltales (haven't fitted the full lights yet). I used the changeover relay (blue one) I found in the ford fusebox. Wiring should be to With regard to the indicators, I left everything wired up as it was on the sieera column. You need to earth the brown wire from the flasher relay. Then find the indicator wires on the column. Check the colours carefully against the diagrams as I have seen a diagram which you need to hold upside down. Not near the car now but I think grn/blk is the RHS indicator. Connect your lamp up to this wire, and then to your earth and the wire should flash, albeit at a fast rate. Did exactly this on the weekend and it is working fine.
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c Last edited by davidimurray : 27th September 2010 at 12:28 PM. |
Thread Tools | |
Display Modes | |
|
|