![]() |
#531
|
||||
|
||||
![]() Slow progress, but I shortened the pickup pipe and have an oil return and drain plug. Whoohoo.
![]() Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#532
|
|||
|
|||
![]() You can't rush perfection
![]() Russ |
#533
|
||||
|
||||
![]() I was actually thinking, If you were not extending the sump backwards, you could drill and tap the 6 bolt posts from the bottom and bolt on a 5-6mm piece of aluminium or some steel with sealant gasket rather than needing to get it all TIGed up.
![]() I wasnt going to extend back but decided I would... Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 4th November 2014 at 10:26 PM. |
#534
|
||||
|
||||
![]() Im swapping to 13" wheels and tyres as I want to get a softer compound tyre and have the extra sidewall flex so bought 1 just to make sure it cleared everywhere ok.
![]() ![]() ![]() They clear the 1.6 running gear nicely so ordered the other 3. Ill cover them in A021Rs in 185/70/13 from http://www.polleymotorsport.co.uk/ only £50 each + VAT. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 4th November 2014 at 11:28 AM. |
#535
|
||||
|
||||
![]() Got my downpipe sorted today. Made a frame from exhaust brackets and 20mm tube then cut and welded bends n flanges.
I have an O2 bung to go on the lower section and its done. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#536
|
||||
|
||||
![]() That fit quite well.
![]() ![]() ![]() Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#537
|
||||
|
||||
![]() Well done, looks good. Nice winter project that. Will you wait for spring before you drive it in anger?
![]() |
#538
|
||||
|
||||
![]() Slight mod to bodywork hole and nobody will know
![]() Nice work. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#539
|
||||
|
||||
![]() Quote:
![]() Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#540
|
||||
|
||||
![]() Sump is now ready to be fitted after being welded by a mate who said it was a pig to weld!
![]() Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
![]() |
Thread Tools | |
Display Modes | |
|
|