#61
|
||||
|
||||
would probably suffer from overheating.... all that hot air has to go somewheres, both from the rad and block and possibly intercooler
|
#62
|
|||
|
|||
There are ways and means to skin a cat and keep it cool as well
|
#63
|
|||
|
|||
hi all
spud, how have you resolved the problem of the rear lower wishbone being lower than the lower chassis rail, i was looking at making an undertray for the rear of mine and found that the lower wishbones were in the way, and as such when the rear wheel is in full drop it would hit the top of the undertray ?.....wonder if my shocks are too long?
__________________
www.heraldic-motorsport.co.uk |
#64
|
|||
|
|||
Dont quote me on this but the travel is very little and there is no issue with it hitting if built to book spec but you need a 25 mm spacer as spud suggested.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#65
|
||||
|
||||
Sorry Tilly i missed this,
Haven't found it to be a problem once you have your suspension and ride heights setup, the only time it is close is when the car is full jacked up. As Paul said a 25mm spacer is also used under RS3 to lower the tray to the floor level. If it is found to be an issue then the side can be trimmed to allow the lower wishbones to move past the undertray. Hope that helps....Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#66
|
|||
|
|||
All we need now is a little chin spoiler for the nose cone......
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#67
|
|||
|
|||
^^
already on it, i made a small splitter for the front already but it needs lowering and a small diffuser putting behind it, made my own ally diffuser for the rear over the weekend, looks a bit Heath Robinson but bloody hell it works. il try and get some picks up soon tilly
__________________
www.heraldic-motorsport.co.uk |
#68
|
||||
|
||||
Quote:
Well chuffed with it.....Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#69
|
|||
|
|||
I have seen some small wing type thingys on a nose cone at a race meeting on a seven type.
The idea I had was a spoiler/wing under the front of the nose cone.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
Thread Tools | |
Display Modes | |
|
|