|
|
#1
6th July 2010, 12:39 AM
|
||||
|
||||
Dilemma!
Hi all,
I have a bit of a quandary with my donor. As you know I have the Sierra 2lt twinky, but I also have the option of an MX5 with a recon engine having done 40k & a gearbox that’s done 20 mile. My question is what would you do, what would be the better build? Thanx all 
|
|
#2
6th July 2010, 12:42 AM
|
||||
|
||||
|
ditch the twincam for sure you know it makes sense
|
|
#3
6th July 2010, 07:16 AM
|
|||
|
|||
|
mx5 all the way. Nice engine
|
|
#4
6th July 2010, 10:01 AM
|
||||
|
||||
|
MX5, just make sure if it's an early engione that the front crank pully has been sorted as early ones worked loose and destroyed the crank nose.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#5
7th July 2010, 10:23 AM
|
||||
|
||||
|
Good call TT,
on cold start the bottom pully wobbles slightly  I think i'll stick with the good old pinto without the ECU Cheers
|
|
#6
7th July 2010, 10:59 AM
|
||||
|
||||
|
Go with your Pinto for now Twin, it will make building / costs a lot easier and you will get a much easier IVA / emissions test. You can always upgrade afterwards, makes for a nice winter project to keep you out of trouble.
Regards....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#7
12th July 2010, 03:09 PM
|
||||
|
||||
|
The lighter front uprights on the Mazda would tempt me away from the Sierra.
Doesn't matter which engine as long as its a zetec really....
|
|
#8
16th July 2010, 11:46 PM
|
|||
|
|||
|
Go with the MX-5, it was designed as sports car so you're on a winner to start with.
MX-5 engine either the 1.6 or 1.8 is bulletproof and the gearbox has better ratios than any of the stock ford boxes. If it's a jap import then could well have LSD! Plenty of parts available. BV
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
