Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 5th January 2019, 07:04 PM
DavidHmx5 DavidHmx5 is offline
Junior Member
 
Join Date: Oct 2018
Posts: 7
Default So it begins...

Really it start during xmas break with getting the garage sorted. Prior to a major clear out it was hard to even get inside.
After some severe culling of crap, several coats of paint on walls and floor, high level racking and tools boards it is now a place I'm happy to be in. Good job really as I guess I will be spending many hours in there.


Reply With Quote
  #2  
Old 5th January 2019, 07:05 PM
DavidHmx5 DavidHmx5 is offline
Junior Member
 
Join Date: Oct 2018
Posts: 7
Default

First job was to get the engine back home from storage at work.
Handy having a car that doesn't have any value
Not a lot of room to play with



Finally out of the car and safe in the garage.


A few bits to remove before bolting to the engine stand.


Then hit first of I suspect many problems. Need some M12 x100 bolts to attach engine which I don't have. Quick trip to work tomorrow will solve that. So that's it for now. Strip down starts properly tomorrow.
Reply With Quote
  #3  
Old 6th January 2019, 06:57 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

That looks like quite a compact garage.. Mine by comparison is quite large,,,, but still can't swing the cat in it ( he get's upset when you even try )
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #4  
Old 7th January 2019, 07:01 PM
DavidHmx5 DavidHmx5 is offline
Junior Member
 
Join Date: Oct 2018
Posts: 7
Default

Yeah it's a bit tight but will only be assembly in there, all fabrication will be done at work. I plan on making some skates the chassis will sit on to allow me to shove it around to create working space at sides or ends as required.
Reply With Quote
  #5  
Old 9th January 2019, 05:13 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Quote:
Originally Posted by DavidHmx5 View Post
Yeah it's a bit tight but will only be assembly in there, all fabrication will be done at work. I plan on making some skates the chassis will sit on to allow me to shove it around to create working space at sides or ends as required.
I did this - effectively a big dolly for the chassis to sit on - it was really handy.
Reply With Quote
  #6  
Old 15th January 2019, 09:16 PM
swanntech swanntech is offline
Member
 
Join Date: May 2012
Location: york
Posts: 40
Default

Good look with the build what part of the country are you from
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:04 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.