|
|
#1
14th October 2010, 12:26 AM
|
|||
|
|||
Slightly strange???
Having got my chassis to rolling stage I have noticed that centre to full left hand lock I seem to have approx 1.5 turns but centre to full right hand lock it seems to be approx 2 turns.
 Is this correct or have I made a cock up somewhere? Everything seems to be positioned correctly.....  Cheers Russ 
|
|
#3
14th October 2010, 09:06 AM
|
||||
|
||||
|
Yup just sounds like it's not tracked How much thread is in each TRE.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#4
14th October 2010, 02:28 PM
|
|||
|
|||
|
Hi TT
The near side TRE is wound fully on to the rack and the off side has still about 3 threads showing on the rack if that makes sense? Last edited by rpjg1975 : 14th October 2010 at 02:31 PM.
|
|
#5
14th October 2010, 04:25 PM
|
||||
|
||||
|
Toe in or out at center?
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
14th October 2010, 09:12 PM
|
|||
|
|||
|
Problem solved!!!
 After a bit of fiddling while I was at the shed to check toe in and out I thought i'd take off the steering wheel and line it up correctly.... Looks like I hadn't tightened the nut up properly as I am now getting in the area of 1.75 turns centre to full lock both ways.... In the words of James May..... Oh C*ck  Cheers for the help anyways guys Russ
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
