few of my bits up FS on locostbuilders

[baz-r]

few of my bits up FS on locostbuilders if anyone is intersted


http://www.locostbuilders.co.uk/foru...php?tid=172271

http://www.locostbuilders.co.uk/foru...php?tid=172276

[Deanno]

For some reason it will not let me see them?

[Bonzo]

Originally Posted by Deanno

For some reason it will not let me see them?

Hi Dean

Don't think you can view new for sale posts on LCB until they are 24hrs old if you are not signed up as a member & logged in.

[Deanno]

I am logged in and all i get is this:


LocostBuilders is a FREE service, supported by sponsorship, a little advertising revenue, and YOUR DONATIONS!


I operate LocostBuilders in my spare time, with connectivity donated to the cause by my business, NetrinoUK. All donations, trader's subscriptions, and the little advertising revenue generated goes straight back into maintaining server hardware to ensure the site runs quickly and smoothly with a substantial amount of money coming from my own pocket - money that I would far rather spend on building my car!

If you would like to contribute towards the site's running costs you may do so using the Paypal link below. A single donation of £10 or more entitles you to an exclusive 'Contributor' message under your username to show all other users that you have made a donation. Also, if you are a new user, you can bypass the 7 day/10 posts requirement to post advertisments in the market place (providing you are not a trader of course!). Contributing to the site is entirely optional. When I started the site I made a promise to keep the site a free resource and will endeavour to keep this promise to the community for as long as is practically possible.

[Bonzo]

That's an odd one Dean

Here's a copy & paste of the adds

----------------------------------------------------------

clearout zetec and sierra parts

i cant move in the garrage attic as i have too much handy stuff i have kept but no longer need so here goes

all parts are in exeter devon collect for free or pay for postage
resonable offers please
if you have any Q please u2u me

from 1.8 cvh sierra 1993 unless stated

alternator with 5v pully (new recon on doner when broken) working when removed

set of cvh engine mount brackets

set of pinto engine mount brackets

4x engine mounts (rubbers)

peddel box inc throttle and brake switch

cvh hybrid ign pack/unit inc plug

exhaust manifold short tube type from blacktop

complete cvh carb/inlet manifold with pipes stat etc in good working order for cfi convertion




zetec parts

1800 ecu inc plug (can be wired to run without pats)

silvertop throttle body inc tps and plug

silvertop idle valve (3hole type)

blacktop throttle body inc tps and plug

1800 cvh flywheel reamed to fit zetec crank with almost new clutch (complete)
for zetec/type9 conversion trigger wheel needed


---------------------------------------------------------------

for sale project zxr636 ITB's on zetec manifold

i have made a manifold for my ms2 injection build with some zxr636 that i no longer need

its a silvertop injector plate with injectors,plugs,pipes, fuel rail and reg included. i tigged some shaped thick wall alloy tubes to fit in a jig to it
with a set of kawasaki zxr636 throttle bodies(38mm) with the motor and 2nd set of butterflys removed and holes plugged.

i have kept all the injectors to go with them if you wish to run them along with all other bits and bobs i have that went with them and will re fit what i have.
tps is still there but i dont have the vac hoses in the pic any more i have lost them somewhere sorry
there is a set of blue fluro hoses but i think i should have gone down a size but thay may squash up with some clips
needs a bit of cleaning up inside but all the hard work is already done

here are some pics note there are no zx injectors shown but are included and its all just resting on a bit of box for postioning thats not a chassis rail.
the boddies will fit either way up (eg. upside down)

spent quiet a bit of time and money on thease and would like them to go to a good home and recoup some of my build funds

in exeter for free colection or pay P&P reasonable offers only please
u2u any Q's you may have


zetec to zx636 bodies


Description


Description

----------------------------------------------------------

I don't expect the images will show though but I expect Baz will upload them to this thread when he gets a chance

[Deanno]

Cheers Ronnie

[baz-r]

thanks for sorting that ronnie

lcb will not let you view new FS posts if you have not donated and logged in but i have never had any issue when logged in if that helps.

im just looking for a few pennies for the buildfund from the odds and sodds befor i chuck it in for scrap

[PorkChop]

I've PM'd you a question or three about your ITBs Baz