![]() |
#1
|
|||
|
|||
![]() hi all
the front lower wishbone jig front mount with the 2x11mm holes 97mm wide the angle 10x51x18mm is it 10x18mm out side taking into account the 3mm plate? cheers thwang |
#2
|
||||
|
||||
![]() Looks like it to me.10mm is height at front incl plate(3mm) and 18.5 at rear,this would generate the 10' angle to locate the wishbone plate through the 11mm dia holes.
|
#3
|
|||
|
|||
![]() thanks ozzy i was going off a photo copy as my books at work
|
![]() |
Thread Tools | |
Display Modes | |
|
|