|
|
#1
16th May 2014, 10:19 PM
|
||||
|
||||
Flasher warning light
Hi everyone
Been having a few issues with my flasher warning light I bought a 3 terminal flasher relay and wired 1 terminal to ign live 1 terminal to the indicator switch and 1 terminal to a warning light the warning light then goes to earth The indicators work fine my issue is the warning light which comes on as soon as I turn the ignition on then flashes when I turn the indicators on So how can I make the warning light only light up and flash when I use the indicators Many thanks
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/ 
|
|
#2
17th May 2014, 02:34 PM
|
|||
|
|||
|
You need the output from the unit to the indicators to take the feed to warning lamp.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#3
17th May 2014, 03:20 PM
|
||||
|
||||
|
Sorry what do you mean
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/
|
|
#4
17th May 2014, 03:22 PM
|
||||
|
||||
|
When I say warning light I mean a small pilot light to indicate the indicators are on on the dash
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/
|
|
#5
17th May 2014, 09:22 PM
|
||||
|
||||
|
What Paul means is to take or find the wire that is spliced into the feeding +ve to your indicators, if you have lft and rgt idiot lights (dash) then you need 2 feeds from each indicator to your dash lights and the easiest place to take a new set from would be the repeater indicators that are usually fitted to wings.
Hope this helps
|
|
#6
18th May 2014, 12:06 AM
|
||||
|
||||
|
Ah yes I see what if I only wanted one idiot light
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/
|
|
#7
18th May 2014, 01:17 AM
|
||||
|
||||
|
A signal diode with the white band or + side pointing towards a single idiot light will allow the current to flow only in that direction, without it all your indicators would come on regardless, this would be placed in the spliced feed from your lft and rgt repeaters or whatever
|
|
#8
19th May 2014, 10:07 AM
|
|||
|
|||
|
Exactly like that ! Sorry if explaination was vague but I forget that we are not all in the motor trade or have electrical expierience .
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
