#1
|
|||
|
|||
diff plates
Why are the diff plates made out of two plates and welded together instead of being pressed out of one piece?
|
#2
|
||||
|
||||
purely for the fact that most people don't have the facility to bend 5mm plate accurately. if you do then go for it.
|
#3
|
||||
|
||||
I would also add, if an incorrect grade of steel plate was used there would be quite a high probability of an un-noticed stress fracture within the area of such a tight 90 degree cold formed bend in 5mm plate
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
Thread Tools | |
Display Modes | |
|
|