|
|
#1
13th October 2012, 11:01 AM
|
||||
|
||||
Mirrors.. What Passes IVA..
So what mirriors are able to pass the IVA and require minimum fuss fitting.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders 
|
|
#2
14th October 2012, 09:46 PM
|
||||
|
||||
|
I've seen a few cars that are fitted Honda CBR mirrors it's either an M8 or flat 2 bolt mounting plate so should be simple to make fit the scuttle.
http://i.ebayimg.com/t/PAIR-HONDA-CB...G)NUg~~_12.JPG
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 14th October 2012 at 09:52 PM.
|
|
#3
14th October 2012, 10:24 PM
|
||||
|
||||
|
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#5
16th October 2012, 12:56 AM
|
||||
|
||||
|
I took the el cheapo ones, well, they are el cheapo. I had to get M10x1.25 nuts to fasten them, the mirror surface is not ideally flat, and the articulating joint is not great (tends to spring back to the middle position). But they look kind of OK and the price is right.
http://www.ebay.co.uk/itm/PAIR-UNIVE...em4ab47 e9b8f
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#7
21st October 2012, 12:30 PM
|
|||
|
|||
|
Quote:
 Bob B
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669
|
|
#8
21st October 2012, 06:06 PM
|
||||
|
||||
|
Initially the mirrors were quite flimsy, but then I added ~70 mm diameter load spreading "washers" out of 2 mm ali on the inside, they helped a lot. These mirrors are not E-marked, but looks like that is not a requirement for IVA.
As for the side repeaters, I left them out for now. They must be mirror mounted or wing-mounted (and visible from the back) in order to pass the ECE requirements. Another silly idea I had are scuttle-mounted motorcycle stalks pointing upward.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
