|
|
#1
24th September 2011, 08:27 AM
|
|||
|
|||
Wanted - Brake Pressure Reducing Valve
Hi
Has anyone got one of the standard brake pressure reducing valves they don't want? I've got discs all around and need something to reduce the rear line pressure. Thanks Matt 
|
|
#2
24th September 2011, 10:13 AM
|
|||
|
|||
|
Scrappy,vauxhall corsa and most fords have them either in the cylinder or at the rear pipes.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#4
24th September 2011, 04:22 PM
|
||||
|
||||
|
try get one off MK2 fiesta, there's a link on locostbuilders, that's what I've bought cost me a tenner bolts straight into master cylinder... don't know if it will work but it's been used a lot on robin hood set-ups with discs all round
|
|
#5
25th September 2011, 12:30 PM
|
|||
|
|||
|
Late reply,pressure reducing personally I would avoid anything speed sensitive as it would be for a larger heavier car and possibly a problem.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#6
25th September 2011, 02:23 PM
|
||||
|
||||
|
Fiat Uno ones are available from factors very cheaply, they can be made adjustable very easily, made unadjustable for IVA, and then returned to the original state!
|
|
#9
25th September 2011, 07:53 PM
|
|||
|
|||
|
Quote:
That's why I was looking for the standard Sierra one - as far as I can tell it just shuts off the rear brakes when the decelleration reaches a certain rate. It may not be optimal, but seems from comments that as long as it is mounted identically to the Sierra then it is enough to pass the IVA. Matt
|
|
#10
26th September 2011, 01:02 PM
|
|||
|
|||
|
Roller brake tester does not take into account deceleration only brake effort/force so could cause a fail at test/IVA.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
