![]() |
#1
|
|||
|
|||
![]() Bonzo
I said ages ago I'd put some piccies up of my manifold - finally managed to do it! Hope your conversion is going ok, this one turned out fairly easy in the end! manifold1.jpg manifold2.jpg manifold3.jpg Cheers Adrian |
#2
|
||||
|
||||
![]() hi, that looks good? what engine are you usig? and what are the throttle bodies from?
Ray |
#3
|
|||
|
|||
![]() It's a 2.0l silvertop zetec engine. The bodies are from a CB900 hornet. They're 36mm bodies, which although a little small, will give a much better throttle response and low down torque (I hope!)
As they're cast in pairs, it's easy to respace them. Cheers Adrian |
#4
|
||||
|
||||
![]() Hi Adran.
Many thanks for that. The manifold has come out very well. ![]() I have done nothing on mine recently, been a bit crook the last few weeks. ![]() Finaly feeling a bit better last weekend, a mountanin of gardening to catch up on. ![]() Hopefully it'll not be too long before I can get back out into the workshop. ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
![]() |
Thread Tools | |
Display Modes | |
|
|