#1
|
||||
|
||||
Plastic fuel tanks & IVA
Does anyone if one of these would get through IVA? Came across it while trawling ebay and thought it might be a decent enough?
http://www.ebay.co.uk/itm/Plastimo-3...item1e6d81f552 |
#2
|
||||
|
||||
Seems a pretty good deal really. I cant see it being a problem personally as lots of cars have plastic fuel tanks these days, i recall my renault 5 gt turbo had a plastic fuel tank and that was back in 1996
|
#3
|
||||
|
||||
IVA Section 03A Fuel tanks says the following.
Quote:
|
#4
|
||||
|
||||
Hmm it'd probly fail then as it's designed for boats by the look of it which most likely don't have to deal with the same levels of vibration.
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
Ya I did see that one but doubt it would fit with the grp rear tub. I could do with getting one that's tall but not very wide or deep.
|
#7
|
|||
|
|||
Good price,Rally Design do fuel cells and you cant get one that size under £100
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#8
|
|||
|
|||
A robinhood/gbs one will fit in the area if you have a grp tub and ditch the two diagnals
A good amount of fuel and long and low. Have a look on the bay. I made my own in alloy of very simular dimensions with a swirl pot built in and flogged off the cheap gbs one on I had. There was a guy making new ones for gbs cars in alloy for 60 quid. |
#9
|
||||
|
||||
What about K4KEV he was making some a while ago,looked pretty smart.
|
#10
|
||||
|
||||
Kev's fuel tanks are top notch. Fillers returns where you want them and what size. Can't fault them!
|
Thread Tools | |
Display Modes | |
|
|