![]() |
#1
|
||||
|
||||
![]() Hi all,
can i ask if the wheels that are usually on a Ford Puma fit the sierra hubs? they are 15inch but not sure of the offset thingy ![]() they are the ones with wide flat spokes, thought these might look ok & cover the rear drums nicely ![]() ![]() thanks andy ps can,t do a link to show the ones i mean ![]() |
#2
|
||||
|
||||
![]() Hi Andy
My fitment guide shows the following information for the Puma wheels PCD 4 X 108 Offset 35 - 45 Bore 63.4mm For a 15" tyre: 50 tyre profile. eg. 195/50/15 ![]() This is the same fitment requirements as the Sierra rim I hope this helps ![]() Edit Ps. Give me the item number so as I can out bid you ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk Last edited by Bonzo : 1st September 2009 at 03:36 PM. |
#3
|
||||
|
||||
![]() wow thanks for that quick info Ronnie,
so they might be just the ticket for me, i can,t afford a new set during the build so if i can find some of these in the mean time then i,ll be happy with them, i like the fact that they have wide "spokes" and so hide the weedy drums & calipers ![]() ![]() cheers andy ![]() |
#4
|
||||
|
||||
![]() Andy im not sure if you already know how to do it, but to create a link in the forum to say a website or an ebay listing, click on the address at the top of your browser window, it will be something along the lines of:
http://www.websitenamehere.co.uk It will turn blue, press Ctrl (bottom left) and the C key simulatanously. This has copied it. To paste it into a message press Ctrl and the V key simulatanously. The forum will automatically make it a clickable link. |
#5
|
||||
|
||||
![]() ![]() ![]() will these do? andy |
#6
|
||||
|
||||
![]() Quote:
I just clicked on that link & the address can't be found ![]() ![]() Sorry, i'll get me coat ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#7
|
||||
|
||||
![]() Ideal Oh what a bummer, too far away. If only I knew someone near to there ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#8
|
||||
|
||||
![]() thanks Tatey & Ronnie,
me & computers don,t really get along......... copy & paste??????? i,m not wall papering the garage ![]() ![]() those wheels are about 20 miles from me ![]() andy |
#9
|
|||
|
|||
![]() This link covers the PCD, offset and bore of a whole range of wheel fitments
http://www.carlsalter.com/wheel_fitments.html Sean |
#10
|
||||
|
||||
![]() thanks for that Sean, useful link for folk.
andy |
![]() |
Thread Tools | |
Display Modes | |
|
|