Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 25th July 2014, 04:31 PM
Badger Badger is offline
Member
 
Join Date: Mar 2008
Posts: 79
Default Sierra brake flexi-hose advice

Hi guys, I've got some nice flexi-hoses that were meant for a sierra, and I'd like some opinions on whether they are usable or not.

The front lines seem OK at full lock and full droop (though there's not a massive amount of droop!), and also at full bounce.


The back lines seem OK at full droop, but may struggle at full bounce because they are being bent too much.





What's the opinion, do these look OK or should I fork out for a set of longer hoses?
__________________
If dysfunction is a function, then I must be some kind of genius.
Reply With Quote
  #2  
Old 25th July 2014, 09:55 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Hi,
The length of the front lines looks OK to me, perhaps a wee too long, but the rear ones look definitely too short. How long are they? I think the original rear flexi lines from Sierra are very short because they are not fitted directly on the callipers or drums, but at the base of the suspension arm where the stoke of the arm is very small. There is a hard line running from the calliper/drum to the base of the suspension arm where the flexi is located. On the Roadster, it is completely different so I don't think they are suitable.

This being said, I think it also depends where you'll have the flexi lines brackets on the chassis. It seems that you haven't put them on yet, right?

- Front: if you have the bracket on U1/U2 as the book says, which is a good place, 450mm overall (end of male fitting to end bulkhead fitting) is a correct length. That is why you front ones look a bit too long I think: if you put the bulkhead on U1/U2, you will certainly have the right length.

Picture of the front brake of my car:

2013-11-26_13-48-38 par Voucht71, sur Flickr

- Rear: the brackets on the back face of RS14 as the book says is not the best position in my opinion, and a lot of us have altered the position of the rear flexi lines brackets. Under RS7/RS7a is a good place in my opinion, that is what I have done on my car. In that case, 450mm overall, same as the front ones, is a good length too.

Here you can see my rear brackets, next to the upper rear wishbone fitting point, on RS7/RS7a, and the 450mm rear flexi lines:


2013-11-26_13-48-23 par Voucht71, sur Flickr

Hope this will help
Reply With Quote
  #3  
Old 28th July 2014, 10:26 PM
Badger Badger is offline
Member
 
Join Date: Mar 2008
Posts: 79
Default

Awesome, thanks for the advice Sylvain. Also, you have mail
__________________
If dysfunction is a function, then I must be some kind of genius.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.