#1
|
|||
|
|||
What thread
Can anyone tell me what is the size of the bolts that secure the mushroom inserts in the front hub carriers ? I've lost the originals, so have nothing to compare.
Cheers Peter |
#2
|
||||
|
||||
M12 x 45
Ford Finis code 6077664 TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
|||
|
|||
Cheers TT
Peter |
#4
|
||||
|
||||
yep m12
dont get 45mm ones as you have to replace them for longer ones any way as you need the thread to come right through another 15-20mm to bolt the wingstays on |
#5
|
||||
|
||||
Good Call Ash, I was just going on the ford parts catalouge
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
||||
|
||||
people always forget the poor little wingstays
|
#7
|
|||
|
|||
Some time since the initial post but I cannot get M12's to fit. I have some 7/16 bolts and fit fine. Can anyone explain please ?
Cheers Peter |
#8
|
||||
|
||||
Quote:
Guess who has just cut some new bolts to be nice and flush with the edge of the upright C**k!
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#9
|
||||
|
||||
Peter
99.9% sure the are a M12 standard metric thread . The threads may be dammaged, clogged with loctite reminants . Personaly I would run an M12 metric tap through them A 7/16" UNC bolt would go in there as it is just a tiny bit smaller & of similar thread pitch. Being M12 metric a 7/162UNC bolt will not provide an adequate grip & will probably strip the thread in the upright when it is torqued up Dave Welcome to the club mate. Would you like an entry in my new magazine .... FUBAR Weekly
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#10
|
|||
|
|||
Cheers Ronnie,
I'll run a tap through tomorrow. Peter |
Thread Tools | |
Display Modes | |
|
|