![]() |
#1
|
||||
|
||||
![]() hi all, does anyone know how far apart the head lamps should be or how long the pipes for the head lamp holders are?
Cheers Samy |
#2
|
||||
|
||||
![]() my headlamp brackets are 12cm from the chassis rail to the center of the hole in the bracket, this then makes the holes between the 2 brackets 90cm wide, tho it depends where on the chassis you weld the brackets, mine are welded above the upper shock mounting bracket.
hope that helps. andy |
#3
|
||||
|
||||
![]() hey andy , thanks for the reply its exactly what i needed to know, i will have them in place tomorrow
![]() thanks Samy |
#4
|
||||
|
||||
![]() no prob, glad to help,
a little tip..... don,t forget to angle the end of the headlamp bracket tube that you weld to the chassis rail, other wise your headlights with look cross eyed ![]() ![]() andy Last edited by HandyAndy : 14th September 2009 at 07:57 PM. Reason: spelling |
#5
|
||||
|
||||
![]() ![]() cheers |
#6
|
||||
|
||||
![]() 7 degrees i believe.
now thats sad is i havent seen the book for about a month lol. dont forget to use andys measurements as a guide. if you fit different size headlights to what andy is fitting you may run into problems |
#7
|
||||
|
||||
![]() Quote:
![]() ![]() Samy..... as Ash has said, be careful on the dimensions of the headlight you use as there is maximum distance they are allowed to be from the outer edge of the front cycle wing to the outer edge of the headlamp bowl ( i think its 400mm ) as per the IVA manual. andy |
#8
|
||||
|
||||
![]() its 400mm from the widest point of the car
![]() ![]() |
#9
|
|||
|
|||
![]() they are ace images. very helpful.
|
#10
|
||||
|
||||
![]() Thank god i didnt fully weld the brackets to the chassis today
![]() Thanks |
![]() |
Thread Tools | |
Display Modes | |
|
|