Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 1st February 2010, 11:16 AM
Tilly819 Tilly819 is offline
Senior Member
 
Join Date: Oct 2008
Location: Leicestershire
Posts: 489
Default Iva 99dba????

hi all is 99.9 still 99 in the eyes of the IVA man?

I have managed to get my car down to 99.0 with the inroduction of a diferant back box and some sound deadning around the engine bay

but i dont fancy cutting it that close, iv ordered a bonnet scoop this morning to hopfully cut down the induction noise well at least muffle it abit.

also you now the exhaust wrap. if i use it then take it off 1 can u re use ( i think my dad fancys some)
and does it leave any marks on the manifold???

chears
tilly

(almost there)
Reply With Quote
  #2  
Old 1st February 2010, 11:19 AM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Well done Tilly, you're nearly there.

Don't forget though that it's 3/4 rpm at max power rather than max rpm, may save you 1000rpm or so.

AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #3  
Old 1st February 2010, 07:47 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

i have only got to have mine done at 3750rpm as my max power comes in at 5000rpm. fingers crossed that its ok on the day

dont forget that at iva they do the test in an open area so its less likely that the sound will have objects like fences to reverberate off.
Reply With Quote
  #4  
Old 1st February 2010, 08:04 PM
slimtater slimtater is offline
Senior Member
 
Join Date: May 2008
Location: Derbyshire
Posts: 250
Default

You can have my db killer as it didn't fit mine and I didn't need it on Sunday. Always worth having with you to pop in if it looks like being an issue.
Reply With Quote
  #5  
Old 3rd February 2010, 11:22 PM
Tilly819 Tilly819 is offline
Senior Member
 
Join Date: Oct 2008
Location: Leicestershire
Posts: 489
Default

is it one you stuff up the can outlet slim?? if so i dont think it would fit because of the bend iv put on the end but i think i might have quietended it down almost enough now will have to test it again at the weekend

chears
tilly
Reply With Quote
  #6  
Old 3rd February 2010, 11:32 PM
slimtater slimtater is offline
Senior Member
 
Join Date: May 2008
Location: Derbyshire
Posts: 250
Default

Yes it is a "stuff it up" one. No problem and good luck.
Reply With Quote
  #7  
Old 3rd February 2010, 11:46 PM
Tilly819 Tilly819 is offline
Senior Member
 
Join Date: Oct 2008
Location: Leicestershire
Posts: 489
Default

chears slim, hope to have a bit of a pre iva check at the local garage emissions brakes etc this weekend then take it for a good shake down and get it weighed at the local airfield

tilly

ps hope it dosnt brake
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:10 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.