Bonzo - If you're still interested, my manifold pics!

[adrianreeve]

Bonzo

I said ages ago I'd put some piccies up of my manifold - finally managed to do it! Hope your conversion is going ok, this one turned out fairly easy in the end!

manifold1.jpg

manifold2.jpg

manifold3.jpg

Cheers

Adrian

[RAYLEE29]

hi, that looks good? what engine are you usig? and what are the throttle bodies from?
Ray

[adrianreeve]

It's a 2.0l silvertop zetec engine. The bodies are from a CB900 hornet. They're 36mm bodies, which although a little small, will give a much better throttle response and low down torque (I hope!)

As they're cast in pairs, it's easy to respace them.

Cheers

Adrian

[Bonzo]

Hi Adran.

Many thanks for that. The manifold has come out very well.

I have done nothing on mine recently, been a bit crook the last few weeks.

Finaly feeling a bit better last weekend, a mountanin of gardening to catch up on.

Hopefully it'll not be too long before I can get back out into the workshop.