#1
|
|||
|
|||
Dion Axle
Hello,
I know irs is all the rage but I want to use a dedion axle on the rear, I will making up a jig tomorrow and need to confirm the dimensions. I make the distance between the outer faces of the RU8 plates at 531 Centre to centre of the lower suspension bracket holes 391 Centre to centre of lower wishbone was 381 lefthand 391 Centre to centre of lower wishbone was 381 righthand 28 Outer face of RU8 plate to centre of RU6 tube lefthand 28 Outer face of RU8 plate to centre of RU6 tube righthand Making a total measurement of 1369mm outside to outside of the RU8 hub mounting plates, I want to use the standard sierra diskbraked lobro type driveshafts without modification Cheers David |
#2
|
||||
|
||||
IS't the rage on solid axle trailing setup cars.
But not on fully independant designed cars. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|