#1
|
|||
|
|||
Pedal return spring
Hi.
Is it necessary to have pedal return springs? I've picked up a torsion spring for a Peugeot and modified it to fit the accelerator pedal, but there's a lot less space for the brake and clutch pedals, so I was wondering if the push back from the master cylinder is enough? |
#2
|
|||
|
|||
Quote:
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#3
|
|||
|
|||
Great, thanks David. I was a bit concerned about the throttle as I've heard the throttle can stick, but the posts I read seemed to relate to bike engine builds. I prefer to have to use extra pressure on the accelerator in any case.
I won't bother with the others though, as modifying the torsion spring was a real pain. |
#4
|
|||
|
|||
I think the best thing to do is to put together the system and try it out; in my case I decided I do need a return spring, but my system is different from most.
I'm going to try one of these next weekend: Tension Spring
__________________
If dysfunction is a function, then I must be some kind of genius. |
#5
|
|||
|
|||
Thanks Badger. It's a bit early for me to test it out, but I will do.
|
#6
|
|||
|
|||
Quote:
|
#7
|
|||
|
|||
According to my confirmation email, it says:
GENUINE PEUGEOT BOXER CITROEN RELAY BRAKE PEDAL RETURN SPRING 452224 Item Number 321785865628 But the eBay hyperlink is too old, so the post has been deleted. Hope that helps! |
#8
|
|||
|
|||
Ah that narrows down the search, thank you!
|
Thread Tools | |
Display Modes | |
|
|