![]() |
#1
|
||||
|
||||
![]() Over the last few months I have been giving some serious thought into buying a decent mandrel tube bender for fabricating exhaust parts.
As some of you know, decent tube benders don't come cheap but feel one would be a usefull investment for my humble workshop ![]() One aspect that is nagging away in the back of my mind is, where the devil can I find a source of coated mild steel & stainless exhaust tube !!?? Guessing that full lengths would be the most cost effective way to buy tube. Tried a few internet searches but all I keep turning up are those infernal directory search engines ![]() Living so far out into the sticks puts me at a real dissadvantage when it comes to buying materials If anyone knows of any exhaust tube supliers I would be pleased to hear about them ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#2
|
||||
|
||||
![]() |
#3
|
||||
|
||||
![]() Yell.com
Steel stockholders, Cornwall 13 hits. Steel stockholders, Devon 18 hits. Exhaust manufactures usually supply 2m lengths Jetex ?
__________________
Be Lucky, Mike. ![]() Last edited by TSM Locost : 27th August 2011 at 12:49 PM. |
#4
|
|||
|
|||
![]() |
#5
|
||||
|
||||
![]() I use jetex too,
May not be cost effective for you plans though. Good fast service though. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
|||
|
|||
![]() Bonzo
give Toptubes a call or a google they supply aluminised tube for exhausts cheers les g |
#7
|
|||
|
|||
![]() Bosal dealers sell pipe or powerflow dealers could bend all you need and as you say Ronnie megabucks for decent bender.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#8
|
|||
|
|||
![]() Quote:
http://t0.gstatic.com/images?q=tbn:A...3B-MPrJzE3ZU_0 Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#9
|
||||
|
||||
![]() Thanks for all of the input guys
![]() Some good sugestions there. I can get ERW round tube localy but stainless & alu coated steel is a bit of a problem. There is a stockist of stainless in Falmouth ( 20 miles'ish ) but his prices are steep to say the least ![]() Not even sure what grade of stainless is commonly used for exhaust components ![]() The whole idea might end up as pie in the sky but kinda thinking of taking a trip up to see Matt at Stakesy's for a demo of the Pro-tools tube bender. Here's a linky for anyone interested in having a gander. Pro-Tools Tube Bender I have had a look at the video clip & it doesn't look to deform the tube too much. Obviously if it deforms the tube badly then it will be no good for on show, exterior exhaust components ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#10
|
||||
|
||||
![]() I've looked into cheap tube benders for about 6 months and have come to these results. Manual type draw benders as found on ebay are around £600-700 due to being imported from the states , you need a strong back and it needs bolting to a good concreate floor the dies are around £200-300 each. How ever there is a company 30 miles up the road from me that makes the same bender as the one on ebay for £300 although the dies are still £200-300each.
Second hand powered machines come up at £4500-6000 but most are 3 phase. You'll either need a converter or replace the motor so thats more money on top. Some times it's cheaper just to buy a job lot of prebent tubes and a vertical bandsaw to trim them down and pass the cost on to the punter. Just my thoughts and alittle research of course but may be some thing to think about.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
![]() |
Thread Tools | |
Display Modes | |
|
|