#1
|
||||
|
||||
Front Hubs
Does anyone know if the sierra front hub oil seals are available on their own or do they only come as part of a kit ? I have stripped my hubs down and the bearings are OK but I don't want to put the seals back as they will almost certainly be damaged now.
|
#2
|
||||
|
||||
It might be possible to get the seals from your Local Ford dealer.
Sometimes it is often possible to get this type of seal from a decent bearing dealer. I have quite often managed to source obsolete seals this way Here is a link that may be local to you Bearing Services ltd ( BSL )
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 11th August 2009 at 05:54 PM. Reason: Insert a link |
#3
|
|||
|
|||
You can still order from your friendly Ford dealer at a cost. I can't remember how much but I remember thinking that's Bl**dly expensive.
J |
#4
|
|||
|
|||
I got mine from a local bearing place... very cheap.
|
#5
|
|||
|
|||
Has anyone managed to get hold of these seals? I'm in the same situation that the bearings all look good, the hubs are cleaned up and now all I need is the seal (and not a full bearing kit).
Looking at ebay the complete bearing kits seems to be around £15-20 and I'd rather avoid that if I can. Ta. |
#6
|
|||
|
|||
Try local motor factors,probably cheaper for full kit than e-bay.
|
#7
|
|||
|
|||
Blimey... so went to the local motor factos... £31/side
Oil seals can't be bought seperately from them... surely there's an easier (cheaper) way? |
#8
|
||||
|
||||
go to the local bearing company they will keep them.
|
#9
|
||||
|
||||
Quote:
As Ash says .... I'll be most surprised if your local bearing company are unable to get the seals for you
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 30th March 2010 at 03:17 PM. |
#10
|
|||
|
|||
Blimey... so went to the local motor factors... £31/side
Thieving Ratbags ! cant remember exactly how much they were per kit but not hugely expensive but I am in the trade and use them daily. |
Thread Tools | |
Display Modes | |
|
|