#1
|
|||
|
|||
sierra wiring loom
hi all.
just looking at my loom now which came from a 1992 1.8cvh sierra. have labelled up few wires but was just wondering what people have kept and what people have removed. a nice list would be nice and easier as i am a complete novice when it comes to car wiring. also does anyone have a list of relays in sierra fuse box and their position number. not in my haynes manual. any help appreciated thanks steve |
#2
|
||||
|
||||
I plan to build from scratch, there is too much junk in the sierra loom.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
||||
|
||||
Me too. Much easier and neater.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#4
|
|||
|
|||
i wouldnt know where to start if doing from scratch so this is simplest way for me.
just need a list of what relays are in sierra fuse box and what their position is thanks steve |
#5
|
||||
|
||||
there was a simple loom diagram done a couple of weeks back.
I can list the relays and their function ( althought that changes sometimes ) their location may be in the main fusebox or under the dash. If you want simple then scrapping the sierra loom and building from scratch realy is the way to go. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
||||
|
||||
I used up the old Sierra loom as
a) It costs nothing b) It has all the correct plugs c) Its got loads of relays and fuses d) All the wiring is the correct thickness BUT.... a) It takes time to shorten all the wiring b) Working out the feeds in the fuse box took me 3 days! |
#7
|
||||
|
||||
The simplified wiring diagram can be found here - http://www.haynes.co.uk/forums/showt...?t=4763&page=3
I attacked my sierra wiring loom the other night to make my custom loom as per my diagram in the link above. In total - from the sierra loom I saved - Reverse switch connector and wiring Brake reservoir level connector and wiring Starter Wiring Alternator Wiring Column Switches & Ignition key swithc wiring. 70A master Relay Flasher relay Changeover relay I cut the wiring as far back as I could in the loom.
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#8
|
|||
|
|||
thanks
almost coming clear now. bit more studying to do but i do agree with deezee with sierra loom. the diagram has helped a lot the relays i want to know about are the ones in fuse box that was in engine compartment. if i knew what each one did,i could eliminate some of them straight away thanks again steve |
#9
|
||||
|
||||
I - Ignition
II - Daytime Running Lights III - Headlamp Wash Wipe IV - Heated rear Window V - Wiper Intermittent VI - Courtesy Light Delay VII - ABS System VIII - Auto KickDown IX - Intermittent Rear Wiper X - Main Beam XI - Engine Manaement XII - AntiTheft/Auto Inhibit A - Engine Run B - Aux Daytime Running/Rear Fogs C - Horn D - Engine Mgmt E - Rear Fogs F - Dip Beam G - Heated Seats H - Front Fogs TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#10
|
|||
|
|||
thank you
can see lots i can get rid of straight away. slightly away from topic, does the sidelights have to come on straight away now when you turn ignition for IVA. or have i just seen this on someones build pics? steve |
Thread Tools | |
Display Modes | |
|
|