#1
|
|||
|
|||
Have I got these right?
|
#2
|
||||
|
||||
Arhhhhhhh
Can’t see pictures at work. Someone will be along soon Cheers Ginge
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread |
#3
|
|||
|
|||
boooooo haha
|
#4
|
||||
|
||||
You've got it fine, the 35mm goes on the inside the way you've got the plates....
I'm sure there has been a thread about this before but the M8 bolts are fine, the breaking strain of 8.8 M8 bolts is 2,985kg x 8 = 23,882kg. I think that should be sufficient. AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#5
|
|||
|
|||
Wooooooo. Excellent! does the 19mm box need fully welding too? Ahhh 23,882kg sounds plenty strong enough! Thanks
|
#6
|
||||
|
||||
yes, fully weld the 19mm box, but do this before you weld the upper shock mounting on, otherwise its difficult to get the welding tip into where you need to weld
don,t ask how I know that cheers andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
#7
|
|||
|
|||
haha that was going to be my next question (which bit to weld first).
Thanks again! |
Thread Tools | |
Display Modes | |
|
|