#1
|
||||
|
||||
Brake Fluid Reservoir Cleaning
Knowing that this group cotains a resourceful bunch - here's a challenge for you. In typical old car fashion my reservoir has gone all cloudy and yellow inside (you can barely see the level!). Anyone know of a good way to clean it internally?
Cheers Dave
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#2
|
||||
|
||||
Personaly I would prize the bottle from the master cylinder.(the last thng you need is solvents/cleaners entering the MC as it is likeley to FUBAR the seals )
You may or may not need to replace the bottle seals after doing this, it would depend how prerished or brittle the seals have become. I would then either soak the bottle in some Jizer or the likes or place the bottle in some very warm/hot water. Add some washing up detergent & a generous helping of domestic bleach. Then soak overnight. Hot soapy water & bleach will often work wonders of clear plastics It may be the case that UV, heat & sheer age has got to the plastic & no amount of cleaning will bring it back to life.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
||||
|
||||
call brakes international and get a new reservoir they are usually about £5-6 plus postage
Quote:
|
#4
|
||||
|
||||
It would be a good idea to change the seal as I would suspect the dicolouration might be due to seal being deteriated. As for cleaning I would use methylated spirit as it will evaprates and leaves no moisture at all. You can buy it from the local pharmacy!
Hope this is of some help.
__________________
Regards Axle |
Thread Tools | |
Display Modes | |
|
|