|
|
#1
13th November 2012, 10:17 AM
|
|||
|
|||
Lower harness mounts...
Not sure if this is a 'chassis' or an 'interior' thread so apologies if it's in the wrong place. I spent Saturday fashioning a jig to support my MEV GRP seats and trying out the seating position for size. The chassis I bought already had some lower harness mounts in place - but I am not sure if they are likely to be in the right place come IVA time given where i've positioned the seat. I am also having a hardtime deciphering the IVA manual requirements - does anyone have any tips on working this out?? Seems I just have to avoid the harness fouling on the GRP when i'm in situ with the belts done up?
The thing that REALLY confuses me is that I can't see any specific requirements about where the mounts are relative to the driver - e.g. lower harness mounts don't have to be behind the driver - although logic dictates that's the only way they'll be effective... 
__________________
http://meandthekitcar.wordpress.com/ 
|
|
#2
16th November 2012, 03:07 PM
|
|||
|
|||
|
In case anyone else on here has similar questions, I posted the same thing on Locostbuilders and got a few responses...
http://www.locostbuilders.co.uk/foru...php?tid=176283
__________________
http://meandthekitcar.wordpress.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
