Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 24th January 2020, 12:49 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default Setting rear wheel alignment

I have seen various posts and resources about setting the wheel alignment, and understand the 'string box' process, which I plan to use.

However- the first starting point - defining the centre line of the car, and then consistently working back against it, is what I am struggling with a little.

One suggestion seems to be to attach a length of box to the car (wider than the track) - probably behind the rear axle, at 90deg to the car centre - to give a definitive reference point for the 'string box'.

Has anyone done this in practice and can share how?

I can see no end of potential for imprecision if I simply fit a couple of rivnuts to the chassis, then bolt up a length of box using say an 8mm hole with m8 bolts (given the amount of 'slop' in a standard hole!)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:39 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.