Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 10th January 2017, 12:54 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default Speeduino Engine Management?

I have been dabling with Arduino Micro controllers every now and then, until recently I have not had any firm projects but have actually got a number of applications now.

Pond Control
Alarm
Moving Head DMX lamp
Ligthing Desk DMX...

Whilst doing research and brainstorming for these ( Including finding a Buzzer and programming it to play the 5 notes from "Close Encounters")

I came across the speeduino engine management system.

It seems like a reasonable project mounting a sensor/driver shield on a Arduino Mega.

I doubt it would come close to a MeggaSquirt but it's interesting all the same.

A built Shield is $160 but I don't know about shipping to the UK or indeed if it is even worth playing with.

It looks like it actually hails from Australia.

Anyone seen or used it.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #2  
Old 12th July 2017, 05:25 PM
geedle geedle is offline
Junior Member
 
Join Date: May 2017
Location: Lancaster
Posts: 8
Default

Sorry to resurrect an old thread, but this is what I intend to use on my build too. The guy that is driving the project runs an MX5 so it should be straight forward.

It's not intended to be a replacement for some of the higher end off the shelf ECUs, but it does fit well with the build it yourself idea.

I was looking at the BOM of materials and it came to about £40 I think (I've got the spreadsheet for it all somewhere). The designs for the PCB are opensource and we can have them printed anywhere. Might be worth doing a run of them?

Geedle.
Reply With Quote
  #3  
Old 12th July 2017, 10:14 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

I have never found a decent Source for LowVol PCB manufacture in the UK.

US has them in abundance

With a BOM of £40 and a low price PCB it would be a gr8 project.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #4  
Old 29th July 2017, 04:08 PM
geedle geedle is offline
Junior Member
 
Join Date: May 2017
Location: Lancaster
Posts: 8
Default

Hi,

I found a couple that I am sure are China based given the cost and lead time. But it does sound like a great project.

I think for IVA it would present a problem as the immobiliser element of the standard setup would be lost. Easy enough to get round I think. 2 circuits associated with starting need to be disabled. Can't be too hard.

Geedle.
Reply With Quote
  #5  
Old 5th August 2017, 07:39 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

where in the IVA does it say you need an imobaliser?

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #6  
Old 5th August 2017, 10:44 AM
geedle geedle is offline
Junior Member
 
Join Date: May 2017
Location: Lancaster
Posts: 8
Default

I'm reading section 13A. But on re-reading, does the steering lock + ignition switch suffice? That said, last time I read, I was sure I found something about the requirement to disable two circuits.
Reply With Quote
  #7  
Old 7th August 2017, 08:06 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

Two Methods of Disabling.

So yes locking the column and needing a KEY to start are two accepted methods.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #8  
Old 7th August 2017, 10:51 PM
geedle geedle is offline
Junior Member
 
Join Date: May 2017
Location: Lancaster
Posts: 8
Default

Ahh - I had assumed (wrongly) that the transponder found in keys and the phisical key were the two. That makes it easier!
Reply With Quote
  #9  
Old 7th November 2017, 11:49 AM
norton norton is offline
Senior Member
 
Join Date: May 2015
Posts: 434
Default

Did anyone go down this route in the end? Assembled megasquirt ecu’s aren’t much cheaper than Emerald ecu’s these days which goes against the on a budget spirit of things.
Reply With Quote
  #10  
Old 7th November 2017, 10:53 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

still an idea but having not touche a car "project" in 2 years its not going to be top of my list..
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.