Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 25th October 2009, 10:56 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default ali seats

has anyone done them yet?
had a quick search but to no avail.
i have made a better net than the one in the book from card . at least a moor ergonomic net , but i can not make a decision on the thickness of aluminum to use?
are there any rules to adhere to? bare the head restraint and correctly positioned harness holes.
Reply With Quote
  #2  
Old 26th October 2009, 01:22 PM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Try this link, these look really good.

http://www.streetperformance.com/m/c...brication.html
Reply With Quote
  #3  
Old 26th October 2009, 01:39 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

Thaye do look cool. Apear to be in ither .100 or .125 of an inch and grade 5052 ally. My boss thought 3mm and did not mention a hardness. Any other thoughts?
Reply With Quote
  #4  
Old 26th October 2009, 05:42 PM
thwang thwang is offline
Member
 
Join Date: Sep 2008
Posts: 84
Default

hi
leon
semi hard is ok i would ask chris about the thickness you might beable to go down to 2mm with 5000 series ally.
thwang
have you mocked one up i would mind seeing one if you have.
Reply With Quote
  #5  
Old 26th October 2009, 05:48 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

Have a cardbord one. Need to cross check all the meshermants and angles with trig.
Reply With Quote
  #6  
Old 28th October 2009, 09:42 AM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

Reply With Quote
  #7  
Old 28th October 2009, 09:48 AM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

I have to say im quite impressed. Can i ask how you are planning on joining the seat together if you decide to go down that route?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
  #8  
Old 28th October 2009, 09:55 AM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

TIG. the seat can be folded from one peace 750x1500 and has 4 seams eatch side that i will TIG weld together.
Reply With Quote
  #9  
Old 28th October 2009, 07:15 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

You now have the start of a mould for a fibreglass seat Leon !
Reply With Quote
  #10  
Old 28th October 2009, 08:01 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

Go on? Is it just cover that in glassfiber and resin?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:55 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.