#1
|
|||
|
|||
Pedal Back Plate Sierra Donor
Does any one have a dimensional drawing of the pedal back plate for a sierra master cylinder that the wouldn't mind sharing with me, save some time?
Thanks Scott |
#2
|
|||
|
|||
I know for a fact that if you were to talk nicely to Vouche who is an absolute star he will let you have a copy of his drawings for an up-dated version of the pedal box.
The pedals are a much stronger design and will not bend like the ones in the book kind regards Arfon |
#3
|
||||
|
||||
There are 2 different flange sizes on sierra master cylinders, One is a cast item the other looks like it's been fabricated.
__________________
Be Lucky, Mike. |
#4
|
|||
|
|||
there are quiet a few diffrent m/c fitted to the sierras over the years so you have to make it fit what you have.
i didnt like the book pedalbox so i junked it and made a new one with drop down pedals |
Thread Tools | |
Display Modes | |
|
|