![]() |
#1
|
||||
|
||||
![]() Im probably missing somthing very obvious here, but which way up does plate cp2 go?? does the side thats 40mm go at the top or the side which is 80mm at the top??
![]()
__________________
my build pics |
#2
|
||||
|
||||
![]() CP2 are placed so the 40mm is at the bottom, its basically a stopping brace for the rear frame when welded to the main frame of the chassis.
andy |
#3
|
||||
|
||||
![]() Thanks, will weld it on now.
![]()
__________________
my build pics |
#4
|
||||
|
||||
![]() one more thing
![]() ![]()
__________________
my build pics |
#5
|
||||
|
||||
![]() its approx 3mm , basically allows the thickness of the steel plate of CP6 to butt upto it to create the straight box when it all gets welded together.
hope that helps andy |
#6
|
||||
|
||||
![]() ok, before i weld anything, can someone confirm for me if this is right, as im not sure it is. THe side of the nuts which is 45mm mm away from the edge is written on.
Thanks ![]() ![]()
__________________
my build pics |
![]() |
Thread Tools | |
Display Modes | |
|
|