Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Donor cars
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 24th February 2010, 11:37 PM
Ryan Ryan is offline
Member
 
Join Date: Oct 2009
Location: Grimsby, Lincolnshire
Posts: 50
Default Donor Glass

Hi all. With a bit of luck and some fingers crossed my donor shell should be leaving me shortly.

I have just realised that the cars registration number is etched onto each piece of glass. What have other people done about this?

I dont want the scrappie/breakers to run it through the computer as scrapped.

Maybe this is the excuse I have been looking for to take to the windows with some kind of blunt object and get rid of some stress?

Cheers

Ryan
Reply With Quote
  #2  
Old 25th February 2010, 12:28 AM
tkpm tkpm is offline
Senior Member
 
Join Date: Sep 2009
Location: Bideford, Devon
Posts: 711
Default

Go for it, you can't beat a bit of stress relief with a blunt instrument
Reply With Quote
  #3  
Old 25th February 2010, 01:15 AM
MrFozzieBear MrFozzieBear is offline
Junior Member
 
Join Date: Aug 2008
Posts: 18
Default

I just took my Dremel to the glass and ground them off including sunroof and lights, it didn't take long and was proberly quicker than sweeping up broken glass off the floor over the next few days.
Reply With Quote
  #4  
Old 25th February 2010, 09:11 AM
deezee's Avatar
deezee deezee is offline
Senior Member
 
Join Date: Jan 2009
Location: Wirral
Posts: 744
Default

I stripped my car with the use of a forklift. So when I rolled it over to strip the suspension, loads of windows smashed out. What didn't get smashed first time, got harpooned with the forks when I moved the shell around.

I never thought of the glass TBH! Although I did a DVLA check on the reg recently and it comes up as SORN.
Reply With Quote
  #5  
Old 25th February 2010, 10:21 AM
Ryan Ryan is offline
Member
 
Join Date: Oct 2009
Location: Grimsby, Lincolnshire
Posts: 50
Default

Cheers guys.

I will have a go with a dremel and see how it goes. Dont fancy sweeping all those little bits of glass!
Reply With Quote
  #6  
Old 25th February 2010, 10:44 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

I used a spot blaster ( Mini, hand held sand blaster )

Dremmel will do the job fine.

If you don't have either .... A flap disc in the grinder or honing stone in a hand drill will also do the job

Don't forget to wear eye protection .... Just in case
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #7  
Old 25th February 2010, 11:28 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

It's up to you to tell the DVLA that the car has been scrapped not the salvage yard.

So unless you fill in the V5 and send it back as scrapped, it should be ok. All you are doing is getting rid of metal. Just remove the chassis plate and floor plate to keep with the documents.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #8  
Old 25th February 2010, 11:44 AM
deezee's Avatar
deezee deezee is offline
Senior Member
 
Join Date: Jan 2009
Location: Wirral
Posts: 744
Default

Most scrappers register vehicles as scrap when they get it. They don't require a V5 or your permission. Written or otherwise!
Reply With Quote
  #9  
Old 25th February 2010, 12:46 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Just to clear up a point or two !!!

It is a legal requirement for a licenced vehicle breaker/disposal/recycler to notify DVLA that a vehicle has been scrapped ( If they are the ones breaking it ) .

My local disposal site will not take a vehicle without a V5 or failing that, photographic proof of ID & proof of address.
That said .... As they are also a general scrap metal merchant, they are able to take the remains of a **pre-scrapped vehicle** as general scrap .... In this case, it would be up to the owner ( Person that acctualy scrapped the vehicle ) to notify DVLA.

Remember .... Honesty is the best policy .... Tell the scrapyard what you are doing & the reason why & you shouldn't run into any problems.
If the yard is anal to deal with....Find another yard

Right, i'll now duck for cover
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk

Last edited by Bonzo : 25th February 2010 at 01:04 PM.
Reply With Quote
  #10  
Old 25th February 2010, 12:56 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

mine got weighed in as scrap metal not a car.

and as for the etching in the windows all i have to say about that is


SANDPAPER
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:58 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.